High quality 2020/jack/2020/jack/853index.php. Reviews January, 2021, page 3

SKF 7004 CD/P4A Angular Contact Bearing, Single Bearing, No Preload, ABEC 7 - 9 Extra Precision, 15° Contact Angle, Metric, 20mm Bore, 42mm OD, 12mm Width

More from Industrial & Scientific
Search only SKF brand name
SKF 7004 CD/P4A Angular Contact Bearing, Single Bearing, No Preload, ABEC 7 - 9 Extra Precision, 15° Contact Angle, Metric, 20mm Bore, 42mm OD, 12mm Width

Current price: 159.9 USD


Check price and availability


  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant

More Info

Koyo B-348 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/8" ID, 2-1/2" OD, 1/2" Width, 3100rpm Maximum Rotational Speed

More from Industrial & Scientific
Search only Koyo brand name
Koyo B-348 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/8

Current price: 18.17 USD


Check price and availability


Height: 2.5 Inches

Length: 2.12 Inches

Width: 0.5 Inches

  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads

More Info

Timken 3872A Tapered Roller Bearing, Single Cone, Standard Tolerance, Straight Bore, Steel, Inch, 1.3750" ID, 1.1875" Width

More from Industrial & Scientific
Search only TIMKEN brand name
Timken 3872A Tapered Roller Bearing, Single Cone, Standard Tolerance, Straight Bore, Steel, Inch, 1.3750

Current price: 243.57 USD

Saving: $201.58 (45%)


Check price and availability


  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing

More Info

Timken 23790 Tapered Roller Bearing, Single Cone, Standard Tolerance, Straight Bore, Steel, Inch, 1.3750" ID, 1.0625" Width

More from Industrial & Scientific
Search only TIMKEN brand name
Timken 23790 Tapered Roller Bearing, Single Cone, Standard Tolerance, Straight Bore, Steel, Inch, 1.3750

Current price: 146.81 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1.3 Inches

  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing

More Info

Fenner Drives 6202200 Trantorque GT Keyless Bushing, 7/8" ID, 1 3/4" OD, 2.88" Width

More from Industrial & Scientific
Search only Fenner Drives brand name
Fenner Drives 6202200 Trantorque GT Keyless Bushing, 7/8

Current price: 153.32 USD


Check price and availability


  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange

More Info

Fenner Drives 6202300 Trantorque GT Keyless Bushing, 1-3/16" ID, 2" OD, 3.13" Width

More from Industrial & Scientific
Search only Fenner Drives brand name
Fenner Drives 6202300 Trantorque GT Keyless Bushing, 1-3/16

Current price: 190.29 USD


Check price and availability


  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange

More Info

Timken 2MM207WI DUL Light Ball Bearing, Metric, 35 mm ID, 72 mm OD, 17 mm Width, Max RPM, 4490 lbs Static Load Capacity, 7800 lbs Dynamic Load Capacity

More from Industrial & Scientific
Search only TIMKEN brand name
Timken 2MM207WI DUL Light Ball Bearing, Metric, 35 mm ID, 72 mm OD, 17 mm Width, Max RPM, 4490 lbs Static Load Capacity, 7800 lbs Dynamic Load Capacity

Current price: 386.16 USD

Saving: $391.22 (50%)


Check price and availability


  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Reinforced nylon cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Super-precision duplex angular contact ball bearings for machine tool applications requiring high accuracy, high speeds, and radial and thrust load support

More Info

Hamilton 88950 Hub and Tube Assembly, 25" Length, 1/16" OD, 0.042" ID

More from Industrial & Scientific
Search only Hamilton brand name
Hamilton 88950 Hub and Tube Assembly, 25

Current price: 35.83 USD


Check price and availability


Length: 635 Millimeters

  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Reinforced nylon cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Super-precision duplex angular contact ball bearings for machine tool applications requiring high accuracy, high speeds, and radial and thrust load support
  • Made of PTFE
  • Light wall tubing
  • Two hub and tube assemblies

More Info

Siemens SMFKE2 Enclosure, Class MMS, Jumbo NEMA Type 1 General Purpose, Used With KO1, KO2B, KO2C, KO3, KO3A, KO3B, KO4, KO4B,KO4C, KO2

More from Industrial & Scientific
Search only SIEMENS brand name
Siemens SMFKE2 Enclosure, Class MMS, Jumbo NEMA Type 1 General Purpose, Used With KO1, KO2B, KO2C, KO3, KO3A, KO3B, KO4, KO4B,KO4C, KO2

Current price: 12.48 USD


Check price and availability


  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Reinforced nylon cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Super-precision duplex angular contact ball bearings for machine tool applications requiring high accuracy, high speeds, and radial and thrust load support
  • Made of PTFE
  • Light wall tubing
  • Two hub and tube assemblies
  • Package Dimensions: 17.78 L x 14.223H x15.494W x(centimeters)
  • For use with KO1, KO2B, KO2C, KO3, KO3A, KO3B, KO4, KO4B, KO4C, and KO2
  • NEMA type 1 enclosure for general purpose use
  • Class MMS enclosure, jumbo sized

More Info

John Deere Original Equipment Pin, Seal & Bushing Kit #W57440

More from Industrial & Scientific
Search only John Deere brand name
John Deere Original Equipment Pin, Seal & Bushing Kit #W57440

Current price: 57.95 USD


Check price and availability


  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Fabric reinforced phenolic resin cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Single-row angular contact ball bearing, supporting one-directional thrust loads, and combined loads where thrust load is predominant
  • Meets standard ASTM F2162 for quality assurance
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Open configuration for lubrication applied in place
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
  • Supports both radial and axial loads between a rotating and non-rotating member
  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • Uses a single hex nut for speed and simplicity of installation
  • Limited axial movement during installation
  • Exceptional concentricity and ability to accommodate bending loads
  • Designed with external counter-torque flange
  • ABEC 7 and ABEC 9 tolerance ratings for high accuracy, high rotational speeds, and increased operating efficiency
  • Reinforced nylon cage evenly spaces balls for reduced friction, vibration, and noise
  • Open configuration for lubrication applied in place
  • Ball contact angle of 15 degrees relative to the inner and outer raceways increases thrust load capacity
  • Super-precision duplex angular contact ball bearings for machine tool applications requiring high accuracy, high speeds, and radial and thrust load support
  • Made of PTFE
  • Light wall tubing
  • Two hub and tube assemblies
  • Package Dimensions: 17.78 L x 14.223H x15.494W x(centimeters)
  • For use with KO1, KO2B, KO2C, KO3, KO3A, KO3B, KO4, KO4B, KO4C, and KO2
  • NEMA type 1 enclosure for general purpose use
  • Class MMS enclosure, jumbo sized
  • Sold on Amazon

More Info

1    2    3    4    5    6    7    8