Best 2020/jack/2774index.php. Reviews January, 2021
D&D PowerDrive M127523 John Deere Kevlar Replacement Belt, Aramid, 90" Length, 1 Band
More from Industrial & ScientificSearch only D&D PowerDrive brand name
Current price: 26.78 USD
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
Peer Bearing 77R6 R-Series Radial Bearing, Double Shield, 3/8" ID, 7/8" OD, 0.2812" Width
More from Industrial & ScientificSearch only Peer Bearing brand name
Current price: 11.19 USD
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
Timken 15SF24 Spherical Plain Bearing, Inch, 1-1/2" ID, 2-7/16" OD, 75000 lbs Static Load Capacity, 24300 lbs Dynamic Load Capacity
More from Industrial & ScientificSearch only TIMKEN brand name
Current price: 72.65 USD
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
Koyo B-3416 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/8" ID, 2-1/2" OD, 1" Width, 3100rpm Maximum Rotational Speed
More from Industrial & ScientificSearch only Koyo brand name
Current price: 17.87 USD
Height: 2.5 Inches
Length: 2.12 Inches
Width: 1 Inches
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- Meets standard ASTM F2162 for quality assurance
- Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
- Full complement of rollers for higher radial load capacity than caged rollers
- Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
- Drawn cup needle roller bearing for applications with high dynamic loads
Peer Bearing 99R4 R-Series Radial Bearing, Double Seal, 1/4" ID, 5/8" OD, 0.1960" Width
More from Industrial & ScientificSearch only Peer Bearing brand name
Current price: 14.78 USD
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- Meets standard ASTM F2162 for quality assurance
- Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
- Full complement of rollers for higher radial load capacity than caged rollers
- Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
- Drawn cup needle roller bearing for applications with high dynamic loads
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
Retort Stand Base: 8" x 5" (200mm x 125mm); Height: 24" (600mm)
More from Industrial & ScientificSearch only Supertek brand name
Current price: 24.99 USD
Height: 6 Inches
Length: 24 Inches
Width: 2 Inches
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- Meets standard ASTM F2162 for quality assurance
- Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
- Full complement of rollers for higher radial load capacity than caged rollers
- Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
- Drawn cup needle roller bearing for applications with high dynamic loads
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Chrome plated milled steel rod
- Base fitted with one levelling screw and nylon feet
- Milled steel base, stove enamelled
Eagle T8701 StormNest Catch Basin Insert, Sediment, Round, Adjustable, 24" - 26", Black
More from Industrial & ScientificSearch only Eagle Abrasives brand name
Current price: 45.32 USD
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- Meets standard ASTM F2162 for quality assurance
- Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
- Full complement of rollers for higher radial load capacity than caged rollers
- Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
- Drawn cup needle roller bearing for applications with high dynamic loads
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Chrome plated milled steel rod
- Base fitted with one levelling screw and nylon feet
- Milled steel base, stove enamelled
- Designed to protect storm drains and sewers from debris and sediments
- Requires no special tools to install and remove Available with or without oil-absorbent feature Made in the USA
- Comes in rectangular and round models
Timken 12SF20 Spherical Plain Bearing, Inch, 1-1/4" ID, 2" OD, 52000 lbs Static Load Capacity, 16800 lbs Dynamic Load Capacity
More from Industrial & ScientificSearch only TIMKEN brand name
Current price: 27 USD
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- Meets standard ASTM F2162 for quality assurance
- Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
- Full complement of rollers for higher radial load capacity than caged rollers
- Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
- Drawn cup needle roller bearing for applications with high dynamic loads
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Chrome plated milled steel rod
- Base fitted with one levelling screw and nylon feet
- Milled steel base, stove enamelled
- Designed to protect storm drains and sewers from debris and sediments
- Requires no special tools to install and remove Available with or without oil-absorbent feature Made in the USA
- Comes in rectangular and round models
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
ArtisLu 14" x 7.5" RV A/C Air Condition Filters Replace 3313107.103/3105012.003
More from Industrial & ScientificSearch only ArtisLu brand name
Current price: 8.59 USD
Height: 1 Inches
Length: 14 Inches
Width: 14 Inches
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- Meets standard ASTM F2162 for quality assurance
- Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
- Full complement of rollers for higher radial load capacity than caged rollers
- Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
- Drawn cup needle roller bearing for applications with high dynamic loads
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Chrome plated milled steel rod
- Base fitted with one levelling screw and nylon feet
- Milled steel base, stove enamelled
- Designed to protect storm drains and sewers from debris and sediments
- Requires no special tools to install and remove Available with or without oil-absorbent feature Made in the USA
- Comes in rectangular and round models
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- 🇱🇷USA Owned Small Business
- Size: 14"x7.5"
- Peach of mind--Buy your RV Air Conditioner Filters today which includes a 1-year warranty if there are any issues. Feel free to contact us if you have any questions.
- Reuse these filter several times by washing using water and a soft brush.
- To effectively filter the dust in the air and ensure a consistent airflow the filter has a strong adsorption capacity.
- 6PCS of AC air filter pad, compatible with Domestic 3313107.103/3105012.003.
D&D PowerDrive M43820 John Deere Replacement Belt, A/4L, 1-Band, 73" Length, Rubber
More from Industrial & ScientificSearch only D&D PowerDrive brand name
Current price: 9.33 USD
- Manufactured by D&D PowerDrive
- Made in china
- Belt 5LK 5/8 x 90in OC (BK87)
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- Meets standard ASTM F2162 for quality assurance
- Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
- Full complement of rollers for higher radial load capacity than caged rollers
- Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
- Drawn cup needle roller bearing for applications with high dynamic loads
- Unit count: 1.0
- The well designed ball compliment and selection of retainers permit use of this series in high speed motor applications
- The Conrad construction of the R series enables these bearings to take a thrust load as well as a radial load
- This series is produced open, shielded or sealed
- Chrome plated milled steel rod
- Base fitted with one levelling screw and nylon feet
- Milled steel base, stove enamelled
- Designed to protect storm drains and sewers from debris and sediments
- Requires no special tools to install and remove Available with or without oil-absorbent feature Made in the USA
- Comes in rectangular and round models
- Rings are treated with phosphate and then coated with MoS2 to further minimize friction
- Both inner and outer rings are manufactured from through-hardened steel and ground to a fine finish to minimize friction
- Grooves and holes in both rings for lubrication
- Spherical for slow moving or low frequency oscillation applications
- Two rings, one installed within the other and machined to pivot within the outer ring, with a single fracture to permit assembly
- 🇱🇷USA Owned Small Business
- Size: 14"x7.5"
- Peach of mind--Buy your RV Air Conditioner Filters today which includes a 1-year warranty if there are any issues. Feel free to contact us if you have any questions.
- Reuse these filter several times by washing using water and a soft brush.
- To effectively filter the dust in the air and ensure a consistent airflow the filter has a strong adsorption capacity.
- 6PCS of AC air filter pad, compatible with Domestic 3313107.103/3105012.003.
- Belt a/4L 1/2 inches x 73 inches oc
- They are designed to perform at the identical or higher level than all other major USA manufacturer's belts of the same Type
- The belts exceed usa rma published ratings levels
1 2